Fleetguard FF5159 spin-on fuel filter with threaded port. 98% efficiency at 12 micron to ISO 19438, 3 lpm, 3/4-16 UNF 2B thread, 140 mm long.
The threaded port on this filter is a fitting point, usually for a water sensor, a drain valve or a priming connection, and it changes what you need to have ready at a service.
If your existing filter has a sensor or valve screwed into its base, that component is normally transferred to the new filter rather than supplied with it. That means two things. First, have a new sealing washer for it, because the old one has taken a set. Second, check the sensor itself while it is out, because a water-in-fuel sensor that has stopped working gives you a warning light that never comes on rather than one that comes on wrongly, and nobody notices the difference.
If your filter has a blanking plug in that port instead, leave it be unless you are adding a sensor.
Rated 98% efficiency at 12 micron measured to ISO 19438, with a flow of 3 lpm and a hydrostatic burst minimum of 1400 kPa. Thread is 3/4-16 UNF 2B with a 72 mm gasket outer diameter. No standpipe is fitted.
Cross-references confirmed across 5 or more brands, including Landini 6654854A1, Kubota HHV references, Atlas GF6101, Lautrette ELG5221, and American Motors TF1652. Full cross-reference table in the specifications tab below.