Fleetguard FF5160 spin-on fuel filter with threaded port. Cellulose, 98.7% efficiency at 12 micron, M20X1.5-6H thread, 138.43 mm long. Fits Clark Equipment and Bomag.
The threaded port on this filter takes a sensor, a drain valve or a priming connection, and whatever is in yours normally transfers from the old filter rather than arriving with the new one.
Two things follow. Have a new sealing washer for whatever you are transferring, because the old one has taken a set and will weep. And inspect the component while it is out, particularly if it is a water-in-fuel sensor: a sensor that has failed gives you a warning light that never illuminates, which looks identical to a system with no water in it.
If your filter has a blanking plug in that port instead, leave it alone unless you are adding a sensor.
Rated 98.7% efficiency at 12 micron, which is fine filtration suited to modern injection equipment. Thread is M20X1.5-6H with a 71.37 mm gasket outer diameter. No standpipe is fitted.
Coverage spans Clark Equipment plant, Bomag compaction machinery, and Lautrette.
Cross-references confirmed across 3 or more brands, including Clark Equipment 4307873 and 920665, Bomag 574 references, and Lautrette ELG5241. Full cross-reference table in the specifications tab below.