Fleetguard FS1015 spin-on fuel water separator. Open port, 98.7% efficiency at 10.1 micron, 95% emulsified water separation, 620.6 kPa burst, 1-14 UNS-2B thread.
A 620.6 kPa hydrostatic burst minimum is the lowest in the separator range, and it places this element firmly on the suction side of the lift pump.
Suction-side filters work under vacuum. They are built to resist collapse rather than burst, and their burst ratings are modest because they never see system pressure. Fit one downstream of the pump and it becomes a pressure vessel it was not designed to be, and a fuel leak on a hot engine is a fire rather than a maintenance issue.
Before you fit any separator, establish which side of the lift pump the housing sits on. If the filter you removed had a burst rating in this range, it belongs on suction.
The open port is for a water-in-fuel sensor. If your machine has no sensor, that port needs a blanking plug rather than being left open.
Separation is 95% of emulsified water with particle filtration at 98.7% efficiency at 10.1 micron. Thread is 1-14 UNS-2B with a 71.98 mm gasket outer diameter. No standpipe is fitted.
Coverage spans Hamm compaction equipment, Fiatallis plant, Bomag machinery, and E.R.F. vehicles.
Cross-references confirmed across 4 or more OEM brands, including Hamm 1236385, Fiatallis 73144663, Bomag 317010 references, and E.R.F. 1355376. Full cross-reference table in the specifications tab below.