Any questions?
Quick answers on warranty, delivery and returns. Can't find what you need? Visit our FAQ page or Call Us.
Your cart is empty :(
Continue shoppingYour cart
Estimated total:
$0.00 AUD
Couldn't load pickup availability
Fleetguard FS1280 spin-on fuel water separator. 96% efficiency at 17.3 micron, 90% emulsified water separation, 2070 kPa burst, 13/16-18 UNS-2B thread. Not for marine use.
Fleetguard state this filter is not suitable for marine applications. If the installation is a vessel, this is the wrong part.
Marine fuel systems face a harder version of the same problem every diesel has. Tanks breathe salt-laden air, condensation is constant, and a vessel that sits between trips gives water time to settle and microbial growth time to establish. Marine separators are specified to a higher standard for exactly that reason, and a unit rated for land use will underperform where it matters most.
There is also a safety dimension. Marine fuel system components are subject to approval requirements that land equipment is not, and fitting a non-approved filter can affect survey and insurance regardless of how well it works.
For land-based plant this is a capable separator: 96% efficiency at 17.3 micron, 90% emulsified water separation, and a 2070 kPa hydrostatic burst minimum that puts it comfortably above ordinary suction-side duty.
Thread is 13/16-18 UNS-2B with a 71.98 mm gasket outer diameter. No standpipe is fitted, so the housing drains back on removal and needs priming.
Coverage spans Fiatallis and Clark Equipment plant, Hydro-Ax forestry machinery, Macdon harvesting equipment, and Bomag.
Cross-references confirmed across 5 or more OEM brands, including Fiatallis 75208274, Clark Equipment 913556, Hydro-Ax 8606007, and Macdon 25850. Full cross-reference table in the specifications tab below.
| Type | Fuel/Water Separator, Spin-On |
|---|---|
| Standpipe | No |
| Outer diameter | 93.83 mm (3.69 in) |
| Length | 164.85 mm (6.49 in) |
| Gasket outer diameter | 71.98 mm (2.83 in) |
| Gasket inner diameter | 62.53 mm (2.46 in) |
| Thread | 13/16-18 UNS-2B |
| Rated flow | 340.00 lpm (89.83 gpm) |
| Primary particle efficiency | 96.00% efficiency at 17.30 micron (c) |
| Test specification | SAE J905 |
| Emulsified water separation | 90.00% |
| Hydrostatic burst, minimum | 2070.00 kPa (300.15 psi) |
| Hydro-Ax | 8606007 |
|---|---|
| Fiatallis | 75208274 |
| Macdon | 25850 |
| Clark Equipment | 913556 |
| Bomag | 31780219 31780206 |
| Gradall | 77383202 |
| Furukawa | 161623 |
| Timberjack | 8413331 413331 |
| Bitelli | 225059 |
| Benati | 1821125 |
| Biurrarena | 144114 |
| Kamaz | 4811170010 |
| Blount | 538241 |
| Tec-Fil | PSC410 |
| Mack | 5839FS1280 |
| Aveling Barford | ABP3003062 |
| BMC Trucks | 9P909740 9P901850 |
| Guangxi Liugong Machinery | 53C0051 |
| TRP DAF | 1535458 |
| Buhler | 86019440 |
| Case IH | 84476807 180412 903410 1310729H1 J390942 E156170 J903410 J930942 J925274 |
| JLG Industries | 7019674 |
| Cummins | 1492250 5296139 5268934 4093730 3935274 3930942 3925274 3903410 3890706 |
| Fiat Hitachi | 76192505 76107829 |
| Hough | 161623 |
| Ammann | ND090931 49501000015 |
| Kobelco | YN50VU0001D2 |
| Dynapac | 900827 4700900827 212374 211032 |
| Blaw-Knox | 9014000300 16400300 |
| AG Chem Equipment | 709936 |
| Hitachi | 76107829 76192505 L76107829 |
| Orenstein & Koppel | 1465437 |
| Massey Ferguson | 3621278M1 1072418M1 1076748M1 1076748M2 |
| Champion Road Machinery | 36846 |
| Paccar | 1046Z571 |
| Versatile | 88833 |
| Dongfeng Motor | 1125N010 |
| Bell Equipment | 221393 |
| Samsung | 9991203410 991203410 A77470S1 |
| Ford | V88833 F3HZ9162A BF5T9155AB |
| Dressta | 161623 851010262 |
| Grove | 9414101066 9414100805 9414100789 |
| Tiffin Parts | TP8320250 |
| New Holland | V88833 E156170 J390942 71101910 75289652 84476807 83977314 75208274 71101919 |
| Link-Belt | C8H0078 3A15893 |
| Agco | 3903410 AG709936 72501531 |
| Xuzhou Const. Machinery Group | Q2100011 |
| Volkswagen | 2RK127177B |
| White | 303437582 |
| Caterpillar | 3L1178 3I1178 |
| Tvh | 2230218 |
| Roma | CBOS3410 |
| Yutong Group | 112500007 112500008 |
| Ssang Yong | 3925274 |
| Manitou | 473728 473725 4133930 |
| Atlas Copco | 71029 1310032245 |
| Sany | A222100000076 |
| John Deere | F413331 |
| Terex / Terex Advance | 15270825 |
| Fiatagri | 76107829 |
| Valmet | 1992366 |
| Hyundai | YUBP00225 39003410 11E170210PB 11E170210 |
| Koehring | 8320253 207840 |
| Barko | MB1992366 53501140 |
| Ingersoll-Rand | 57150849 88122551 59728196 35374669 |
| Vermeer | 220162023 107611001 |
| Sdmo | CL53 330560508 330560192 |
| Franklin | 1507033 |
| Steiger | 331158T1 |
| General Motors | 25012001 |
| Bosch | 986450713 9455080008 |
| Zettelmeyer | 22854649 |
| Halla | 3903410 53Z025000 |
| Onan | 1492582 |
| Mc Cormick | MCJ925274 |
| Komatsu | CU3903410 CUFS1280 6742015065 6732716120 161623 |
| Timbco | 15812 |
| JCB | 02910150A 2910150A 2910150 |
| Ppm | K2650575 |
| Volvo | VOE991203410 VOE43923093 VOE36846 991203410 43923093 36846 |
| Claas | 341771 3417710 |
Free shipping across Australia (metro and regional areas) once your order reaches the minimum spend for its category.
| What you're ordering | Free shipping from | Good to know |
|---|---|---|
| Small parcel items: filters, smaller parts and accessories | $149 | Orders up to 5kg |
| Local delivery: Geelong, Bellarine and Surf Coast | $199 | Up to 4 x 20L or 4 boxes |
| 4WD filter kit and oil bundles | $249 | 350ml to 10L bottles, 22kg limit, selected postcodes |
| Truck filter kit and oil bundles | $349 | 350ml to 20L bottles, 40kg limit, selected postcodes |
| Workshop hardware and equipment | $499 in Victoria $999 Australia-wide | Items up to 35kg each, excludes large bulky items |
| Bulk oil: 205L and 208L drums, IBCs | Always free | Delivered in 1-3 business days |
| Polycube diesel and AdBlue tanks | Free within Victoria | Outside Victoria, contact us before ordering |
| Click and collect, Geelong warehouse | Free | Ready within 2 hours |
Under the minimum? Shipping is calculated at checkout. Need freight arranged for a large or unusual order? Contact us before you buy and we'll sort it out.

$33.00 AUD
Quick answers on warranty, delivery and returns. Can't find what you need? Visit our FAQ page or Call Us.
Yes. Every product we sell carries its manufacturer’s warranty, and you make any claim through us. We lodge it with the manufacturer and keep you updated on the outcome. Cover varies by brand, and the manufacturer decides the claim, usually after inspecting the part.
Fitting aftermarket filters won’t void your vehicle or equipment warranty on its own, as long as you fit the correct part at the OEM service interval. A manufacturer’s warranty is in addition to your rights under the Australian Consumer Law. It doesn’t replace them.
You can return it for a change of mind within 30 days of delivery. The item has to be unopened and unused, in its original undamaged packaging, and come back with your invoice. Filters that have been fitted, and oils or fluids that have been opened, can’t be returned for a change of mind.
If we sent the wrong part, contact us within 7 days of delivery. We’ll collect it and send the correct part at no cost to you.
We ship to every state and territory in Australia. Estimated delivery from dispatch is 1 to 2 business days for same-state express and 3 to 6 business days for interstate standard. These are carrier estimates, and remote addresses can take longer.
At checkout you can choose Cheapest, Fastest or Best Value. Orders of $149 or more ship free, up to a total weight of 5kg. Inner Melbourne orders booked before 10am arrive the same day.
You can also use Click and Collect from 68 Nobility Street, Moolap. Orders are usually ready within 2 hours, Monday to Friday, 8:30am to 4:00pm.
Please contact us before you send anything back so we can give you a return authorisation. If your order arrives damaged or is the wrong part, tell us within 7 days of delivery and include photos. For faulty products we pay the return and replacement shipping.
We aim to process refunds and replacements within 5 business days of receiving the item. Refunds go back to your original payment method. Full details are in our Return Policy.