Fleetguard FS19551 cellulose fuel water separator. 93% efficiency at 10.1 micron, 60% emulsified water separation, 1-14 UNS 2B thread, 155 mm long. Gaskets included.
At 60% emulsified water separation this element is well below the 95% typical of the separator range, and that figure deserves a straight explanation rather than being buried.
Emulsified water separation depends on coalescence, and coalescence needs the right media and enough dwell time for suspended droplets to migrate and merge. A cellulose element optimised for particle filtration will remove free water reasonably well and much less of the emulsified fraction.
What that means practically: this element is a competent fuel filter with useful free water handling, not a high performance separator. If your fuel comes from a well maintained supply and free water is the main concern, it does the job it was specified for. If you are drawing from an ageing bulk tank in a humid climate, where most of the water is emulsified, it will pass more than you would like and a higher specification separator is worth asking about.
The package includes a beveled top gasket and a bowl gasket. Both should be fitted rather than reused, and it is worth checking they are in the box before the job starts.
Particle filtration is 93% efficiency at 10.1 micron.
Cross-references confirmed across 3 or more brands, including Blue Bird 1966993, Wagner 5540611700, and Foton 1105111500002. Full cross-reference table in the specifications tab below.