Fleetguard FS19596 spin-on fuel water separator. StrataPore, 98.7% efficiency at 7.9 micron, 95% emulsified water separation, WIF sensor, standpipe fitted, 248.31 mm long.
At 98.7% efficiency at 7.9 micron this is one of the finest separators in the range, and fine filtration and water separation pull in the same direction more than people expect.
The coalescing stage works by presenting emulsified water droplets to a large fibrous surface area so they can merge. The same fine, high surface area structure that does that job well is also an effective particle filter. That is why the better separators tend to be the finer ones: it is the same media doing both jobs, not two compromises bolted together.
What it does mean is that a separator is doing more work than a plain fuel filter and will reach its capacity sooner in dirty fuel. If your separators are blocking early, the answer is usually upstream, at the bulk tank, rather than a coarser filter.
This element separates 95% of emulsified water, carries a water-in-fuel sensor, and has a standpipe fitted so the housing does not drain back on removal. Hydrostatic burst minimum is 1400 kPa.
Media is StrataPore. Thread is 1-14 UNS-2B with a 71.98 mm gasket outer diameter.
Cross-references confirmed across 5 or more OEM brands, including Cummins 3406889 and 4070801, Case IH 87307432 and 87302104, and BMC Trucks 9P919293. Full cross-reference table in the specifications tab below.