Fleetguard FS19652 StrataPore fuel water separator. 95% efficiency at 5 micron, 1960 kPa burst, 3.8 lpm, 13/16-18 UNF 2B thread. Drain valve and pipe must be reused.
The drain valve and the pipe from your existing filter must be transferred to this one. They are not supplied with it.
That catches people out, and it catches them out at the worst moment: the old filter is off, the new one is in hand, and the drain assembly is still attached to the unit in the waste oil tray. Take the drain valve and pipe off the outgoing filter before you discard it, inspect the sealing washer, and have a replacement washer ready because the old one has taken a set.
If the drain valve itself is damaged or the pipe is perished, order those separately rather than reusing something that will weep.
The filter is rated 95% efficiency at 5 micron, which is fine filtration appropriate to modern injection equipment, with a hydrostatic burst minimum of 1960 kPa and a rated flow of 3.8 lpm.
Media is StrataPore, a multilayer melt-blown synthetic. Unlike cellulose it does not soften in wet fuel, which matters in a separator where the media is deliberately working with water present.
Thread is 13/16-18 UNF 2B with a 72 mm gasket outer diameter.
Full cross-reference table in the specifications tab below.