Fleetguard HF28783 spin-on hydraulic filter. 98.7% efficiency at 35 micron, 99.5% at 40 micron, bypass valve fitted, 3/4-16 UNF-2B thread, 88.96 mm long.
This element has a bypass valve, and on a hydraulic filter that is worth knowing rather than assuming.
Where a hydraulic filter has no bypass, the element must be changed before it plugs or it will collapse, and the catalogue is explicit that a differential pressure gauge is required in that situation. Where a bypass is fitted, as here, the system protects itself: when the element loads or the oil is cold and thick, the valve opens and flow continues around the element rather than through it.
That is safer for the pump and worse for the oil. Every minute in bypass is a minute of unfiltered circulation. A bypass valve is a safeguard against catastrophic failure, not a licence to extend the interval, and a filter that spends its winters in bypass is not filtering much at all.
If your machine works in genuinely cold conditions, oil grade matters as much as filter choice.
Filtration is beta 75 at 35 micron and beta 200 at 40 micron, which is 98.7% and 99.5% efficiency at those sizes. Thread is 3/4-16 UNF-2B with a 69.97 mm gasket outer diameter.
Coverage spans Case IH and New Holland agricultural equipment, Ford, and Mack.
Cross-references confirmed across 4 or more OEM brands, including Case IH ND137978, New Holland ND1379 references, Ford SBA140517020, and Mack 5839LF16011. Full cross-reference table in the specifications tab below.