Fleetguard HF6357 spin-on hydraulic filter. 1-12 UNF-2B thread, 93.12 mm OD, 116.1 mm long. Fits John Deere and Toro. Replaces John Deere M131053.
Toro and John Deere together point at turf and grounds equipment, which has a hydraulic problem that construction plant does not: the machine works where people walk.
A hydraulic leak on an excavator is a maintenance issue. The same leak on a greens mower or a municipal mower is a contamination event on a surface someone will use, and on turf it kills the grass in a visible stripe that takes a season to recover. That is why grounds equipment tends to run biodegradable hydraulic fluids, and why fluid condition and filtration get more attention than the machine size would suggest.
If your machine runs a biodegradable or ester-based fluid, tell us. Those fluids are more sensitive to water contamination than mineral oil and can be harder on seal materials, and it affects which filter and which service interval make sense.
The HF6357 is a spin-on element, 93.12 mm across and 116.1 mm long, with a 1-12 UNF-2B thread and a 71.98 mm gasket outer diameter.
Note that some listings describe this part as a cartridge. It is a spin-on.
Cross-references confirmed against John Deere M131053 and Toro 678110. Full cross-reference table in the specifications tab below.