Fleetguard HF6535 spin-on hydraulic filter. 3/4-14 BSP thread, 93.22 mm OD, 146.56 mm long. Fits Bomag, Ransomes and Diamond.
This is the second BSP-threaded hydraulic filter in the range, and the warning is the same as on the HF35102: BSP and NPT look alike and will start on each other.
BSP is a parallel thread with a 55 degree form and seals on a gasket. NPT is tapered with a 60 degree form and seals on the thread itself. Offer an NPT filter to a BSP head and it will engage a turn or two, feel like it is going on, then bind. Force it and the head is damaged, which on a hydraulic block is an expensive repair.
If the filter you are removing has a straight thread and a gasket, it is parallel. If it seals on a taper with no gasket, this is not the filter.
Ransomes on this cross-reference points at grounds and turf equipment, where hydraulic leaks are a contamination event on a surface people use rather than just a mess. Machines in that sector often run biodegradable fluids, which behave differently from mineral oil on water contamination and seal compatibility. If yours does, tell us.
No standpipe is fitted. Gasket outer diameter is 71.98 mm.
Cross-references confirmed across 3 or more brands, including Bomag 5826002, Ransomes Simms and Jefferies references, and Diamond FDI151810. Full cross-reference table in the specifications tab below.