Fleetguard HF7551 spin-on hydraulic filter. Synthetic media, 98.7% efficiency at 25 micron, 2200 kPa burst, 96.5 mm OD, 136.7 mm long. Fits Kubota and Furukawa.
A 2200 kPa hydrostatic burst minimum on a filter only 136.7 mm long tells you this element lives in a pressure line rather than a return line.
Hydraulic filters sit in one of three places and the position dictates the specification. Suction filters sit before the pump and work under vacuum, built to resist collapse. Return-line filters sit after the work has been done and see modest pressure. Pressure filters sit downstream of the pump and carry full system pressure, which is why their burst ratings run several times higher.
Fitting the wrong one is not a matter of degree. A return-line filter in a pressure line is a rupture waiting for the first relief valve event.
If you are unsure which position your filter occupies, trace the line. If it runs from the pump toward a valve block, it is a pressure filter.
Media is synthetic, rated beta 75 at 25 micron, which is 98.7% efficiency at that size. Synthetic media holds a more consistent pore structure than cellulose and does not soften with water contamination, which matters in hydraulic oil that has been in service.
Coverage spans Kubota engines and compact equipment, and Furukawa plant.
Cross-references confirmed across 2 or more OEM brands, including Kubota 6884162280 and 6636137950, and Furukawa 4070134110 and 4070100400. Full cross-reference table in the specifications tab below.