Fleetguard LF14000NN NanoNet combination lube filter. Two stage StrataPore and NanoNet media, 98.7% efficiency at 30 micron to ISO 4548-12, 105 lpm, M95X2.5-7H thread.
NanoNet is not one media, it is two working in sequence, and that is the part worth understanding before comparing this filter against a cheaper equivalent.
The first stage is StrataPore. It removes the larger particles from the moment the engine starts, which is when unfiltered oil does the most immediate harm and when a cold, thick charge is hardest to push through a fine media. That stage gives immediate protection without imposing the restriction a fine media alone would.
Behind it sits the NanoNet layer, which captures the small, fine particles that a conventional media passes. Those are the ones that cause long term wear rather than sudden damage: too small to seize a bearing, numerous enough to abrade one over a drain interval. Splitting the job across two media lets each be optimised for the particle size it handles rather than compromising on a single structure.
The result is 98.7% efficiency at 30 micron held to ISO 4548-12, the multi-pass standard that measures performance across service life rather than at a single point. That distinction matters most on extended drains, where standard media falls away in the back half of the interval, exactly when the oil is dirtiest.
This is a combination filter, carrying full-flow and bypass stages in one housing. Rated flow is 105 lpm with a hydrostatic burst minimum of 2068.4 kPa.
Thread is M95X2.5-7H, a large metric thread. Confirm it matches your filter head before ordering.
Cross-references confirmed across 6 or more OEM and aftermarket brands, including Daewoo 97400034P, Hyster 1515822, and Kawasaki YE3101869. Full cross-reference table in the specifications tab below.