Fleetguard LF3826 spin-on lube filter. Cellulose, 98.7% efficiency at 50 micron to ISO 4548-12, 7 lpm, 100 kPa bypass, 3/4-16 UNF 2B thread, 61 mm long.
At 61 mm long this is a stubby filter, and short filters have a specific handling issue: there is very little to grip.
A spin-on that has been on for a service interval takes real force to break loose, and on a filter with 61 mm of body and a 78 mm diameter there is almost no leverage available by hand. A strap or cap wrench is the answer, and the cap type is better here because a strap on a short body tends to crush the shell rather than turn it. A crushed shell on a filter you are removing is merely annoying. The same wrench used on a new filter to tighten it is a damaged pressure vessel.
Tighten spin-ons by hand to gasket contact and then the marked turn, never with a wrench.
Rated at 98.7% efficiency at 50 micron measured to ISO 4548-12, 7 lpm, with a bypass opening at 100 kPa and a hydrostatic burst minimum of 1500 kPa. Thread is 3/4-16 UNF 2B with a 71 mm gasket outer diameter.
Coverage spans Ruggerini engines, Landini tractors, Clark Equipment plant, and Tennant machinery.
Cross-references confirmed across 5 or more OEM and aftermarket brands, including Landini 220753, Clark Equipment 995390, Ruggerini 21752010, and Diamond FD8247. Full cross-reference table in the specifications tab below.