Fleetguard WF2074 spin-on coolant filter. 12 units DCA4 additive in pellet form, 11/16-16 UN-2B thread, 137.21 mm long. Cummins standard service.
Cooling system failures account for more than 40% of engine repair costs, which puts a coolant filter in a different category from the part price would suggest.
This filter does two jobs. The mechanical one removes casting sand, scale, rust and the solid debris that circulates through any cooling system and settles in the low flow areas of the radiator and oil cooler, where it quietly reduces heat transfer. The chemical one releases 12 units of DCA4 supplemental coolant additive into the system as coolant passes through, replenishing the additive package that depletes with use.
The additive is carried in pellet form, which dissolves progressively rather than dumping into the system at once.
DCA4 chemistry contains nitrite and molybdate for liner pitting protection and phosphate for acid protection. Liner pitting is a cavitation phenomenon: vibrating cylinder walls collapse vapour bubbles against the liner, and without adequate nitrite the protective film is stripped faster than it re-forms. The result is perforation from the coolant side, and it is not repairable.
The unit count matters. A filter delivering the wrong number of DCA4 units into your system volume will either under-protect it or overconcentrate it. Confirm the requirement for your engine before substituting a different count.
Thread is 11/16-16 UN-2B with a 71.88 mm gasket outer diameter.
Cross-references confirmed across 4 or more OEM brands, including Mack 3076PR3911, Fiatallis 9901570, Daewoo 91008147, and BMC Trucks 9P909753. Full cross-reference table in the specifications tab below.